Worm travel gearbox with motor
A robust worm-travel gearbox powered by an MM28 motor. Ideal applications where a simple to fit, high torque output is required. Ideal for student based projects including robots and buggies.
The machine has been designed to ensure that the output shaft could be ‘clicked’ in and out for modification. Electronic.g. cutting down to size. The engine is snap installed into its cradle to engage the apparatus and worm.
1 – 6V DC
0.1A to 1A depending on load
Driveshaft length: 12.5cm
Driveshaft diameter 3mm
Gearbox ratio: 42:1
General dimensions of box + electric motor: 35(W) x 40(H) x 60(L)mm
The primary feature of this high-efficiency gear box is a worm gear, which locks the output shaft whenever the motor isn’t turning. The high equipment ratios of 216:1 or 336:1 make this gearbox appropriate for small strolling robots, lifting mechanisms, and other applications where substantial torque is desired.
The low-voltage motors in the worm gearbox operate on 1.5-4.5 volts and draft to some amps, making them perfect candidates for the DRV8833 motor driver carrier. Engine overheating can be due to excessive stalling, also at very low voltages. We advise that you use stall-detection sensors, or simply view your robot, to make sure that it doesn’t stall for lots of seconds at the same time.
This gearbox includes a 4 mm diameter, round output shaft, which works with the wheels that are compatible with Tamiya 4 mm, round shafts. Our 3 mm universal mounting hub also fits on the smaller threaded end of the shaft, although it is not especially intended to work with this kind of shaft (the hub’s set screw could damage the thread on the shaft).
Ever-Power gear motors happen to be economical, right-angle, worm-geared motors that install easily in the tightest applications. Economical right angle worm geared motors set new specifications for reliability, efficiency and economic climate with unparalleled features including hollow shafts in the smallest sizes. An inverter friendly design offers easy integration right now and a truly future proof remedy. The Ever-Power gear engine offers total flexibility in mounting options includes shaft, base, face, and flange alternatives. The motor terminal box could be mounted in choice positions rotated in 90º steps around the motor frame offering for unparalleled integration possibilities.
Ever-Power gear motors adhere to North American and International specifications, including NEMA, IEC, CSA, and CE, the Ever-Power series allows for worldwide acceptance, a true total solution for our global clients.
Superior protection of IP65 acc. to IEC 529 assures you that the Ever-Power series is dirt tight and hose proof,and can be utilized outside or in wet and dusty conditions without the use of additional enclosures. Full rated output is available at the result shaft of the machine.
Power rating up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Completely enclosed, sealed against dust and water spray
Lubrication change first after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Regular), IP66 (Optional)
Connecting with Connect connectors.
With integrated inverter up to 7,5kW.
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to Sobre 60034
Corrosion category based on DIN ISO 12944-5
C1, C2, C3, C4, C5-We, C5-M
DC WORM GEAR MOTORS
Ever-Power DC worm equipment motors are the answer for applications requiring a good part turn, optional dual result, or perhaps an inability for the engine to be back driven. The DC right angle equipment motors are designed for continuous and intermittent duty operation. Our right angle equipment reducers were created with a number of mounting plate choices, making them ideal for a variety of DC electric motor based applications. We offer 12 ratios ranging from 5:1 to 100:1.
1/43 to 3/8 HP
12, 24, 90, 130, 180 VDC, 115 FWR
9 – 475 RPM
1.5 – 315.9 in-lb rated torque
Frame Size 60, 80, 108 mm
5:1 – 100:1 standard ratios
Regular brush life of 2000+ hours (varies by application)
EP Products Worm Gear Motors are created to generate high torque in a little package size. Worm Gear Motors are excellent for applications that require a self- locking or breaking characteristic since the output shaft can’t rotate when there’s no power applied. Also, Worm Gearheads can transfer motion in 90 degrees. With various decrease ratios, precision slice gears, voltages and sizes, EP Products includes a DC Worm Gear Motor solution for the application.
Features and Benefits
Very High Torque Capabilities
Self-Locking / Braking Features
Motion Transfer of 90 Degrees
Capability to Handle Large Equipment Reduction Ratios
Security Door Locks / Industrial Conveying Devices / Security Gates / Dental Chair / Ambulance Cots & Stretchers Quite a few DC Motors can be complimented with one of our Worm Gearheads. EP Items will work with you to create and manufacture a Worm Gear Engine that may optimize the functionality of your specific application.
Built to your unique requirements
Motor Type: Brushed / Brushless / Coreless
Shaft Material & Size
Shaft Configuration: (D Cut / Round / Splined / Other)
Overall Size Parameters (L, W, H)
Encoder Type: Optical / Hall Effect
Additional Assembly Requirements (lead wires, connectors, etc.)
The turbo metal gear worm electric motor runs on the metal gear box for strength and a higher torque output. Because of the special mechanical structure of the worm travel the engine output shaft is usually self locking and may not be rotated.
This part uses a two wire connection and supports direction control in addition to PWM speed control. Ranked voltage is 12v and can obtain 40RPM, with a torque of 8kg/cm.
Operating Voltage: 6 – 15 V
Rated Voltage: 12V
No-load Speed: 40 RPM
No-load Current: 35 mA
Rated Torque: 32 RPM
Rated Current: 180 mA
Rated Torque: 2.2 kg.cm
Rated Power: 1.1 W
Stall Torque: 8 kg/cm
Stall Current: 1 A
Reduction Ratio: 1:150
Weight: 167 g
EP Geared Motors with Worm Gearing – Modual & Customizable drive technology
Worm gear devices from EP DRIVESYSTEMS especially show their strength in applications where great gear ratios are essential. Our worm geared motors are as a result optimally suited for make use of in intralogistics, packaging technology and the food & beverage industry.
Four great reasons for EP worm geared motors:
Our worm geared motors have a higher overload capacity
Washdown versions allow simple and efficient cleaning of the travel system.
The NSD tupH sealed surface area conversion is exceptionally chemical, corrosion and abrasion resistant.
Our modular design give users optimum freedom.
The modular system for maximum flexibility: Our EP worm gear units
There are many applications that require drive systems, and each one of these has its own unique requirements. The EP series worm equipment motors could be quickly and effectively adapted to meet your needs.
Worm gear systems impress with their large power density and small design. If required, we can also supply them with the highly effective nsd tupH surface area treatment.
In addition to the basic EP housing, we offer an extensive line of bolt-on elements to customize the merchandise including torque arms, shaft covers and output flanges. These can be easily field set up, but we will also be pleased to assemble the average person components for you.
Find out more about our modular SI worm geared motors!
Find out more
Smooth and Tidy: The EP worm equipment unit SMI
SMI worm gear systems feature a even, corrosion-resistant alluminum alloy casing. Optional nsd tupH surface area conversion makes the product ideally suited for severe and challenging industries like food processing and pharmaceuticals.
Adaptable input designs such as for example NEMA, IEC or immediate motor mounts in additional foot or flange mounted casing designs.
Worm geared motors
Worm geared motors for small power range.
The WATT small worm gear unit adapt themselves concerning UNIBLOCK design optimally in the geared engine program. The units have on all sides unique fixing possibilities and enable an easy assembling for the client.
Other drive configurationscan be designed by use of built-in components (e.g. torque arm and result flanges). The housings are created in light weight construction out of aluminium die cast. Engine attachment is realised generally by means of IEC adapter B5 or B14A.
Number of sizes:5
Power Range:0.12 – 2.2kW
Output torque range:17 – 230Nm
Ratio:5 – 100
Output option:result shaft, output shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/installation:uniblock, flange, torque arm
Buy Worm Get Gearbox with Motor – incorporating the following features: 1 to 6V voltage ranking, 17100 rpm simply no load velocity, 220g-cm stall torque, 3mm shaft diameter, 60mm long, 35mm extensive, 40mm high, a robust worm travel gearbox powered by an MM28 engine (included), most ideal for applications where a simple to fit, high torque output is required, nylon housing and equipment, requires light oil or perhaps silicon grease lubrication, ideal for student based tasks including robots and buggies.
Most suitable for applications where a simple to fit, high torque result is required
Perfect for student based tasks including robots and buggies
Reversible Great torque Turbo Worm Gear Motor JGY370 DC 12V 40RPM
Reversible Large torque Turbo Worm Gear Motor JGY370 DC 12V 40RPM
The motor is Gear DC motor with micro-turbine worm, you can change the wiring-connection to improve motor rotation.
Turbo worm geared motor with self-lock, that’s, in the case of motor without electrical, the output axis is usually fixed, self-lock.
The reducer output shaft arranged vertically with the motor shaft, whole motor output shaft relatively-short than general gear engine, widely used to be installed the dimensions requirements strictly occasion.
No load speed: 40r/min
Result torque: 5.6kg.cm
Rated current: 0.06A
Application: open the windowpane, door, Mini winch. Ect.
In sumo robot or combat robot competition where substantial holding torque’s motor is essential in order to avoid your robot being pushed by your opponent robot. The worm gear is definitely a better option compared to the spur gear motor. How come worm gear so special? Check this wiki out: Worm Drive.
“Unlike with ordinary equipment trains, the direction of transmission (insight shaft vs result shaft) is not reversible when working with large reduction ratios, due to the increased friction involved between the worm and worm-wheel, when usually an individual start (one spiral) worm is used. This is often a advantage when it’s desired to get rid of any likelihood of the output driving the input.”
In other phrases, it is tough to push your load (example, your robot) if the motor isn’t power or rotate.
Features and Spec:
Metal gear box
Output shaft is self-locking due to the worm gear’s characteristic
Rated voltage: 12V DC
Rated output speed: 150 RPM
Rated output torque: 117mN.m (1.2kgf.cm)
Stalled torque: 196mN.m (2kgf.cm)
No load current: 60mA
Stalled current: 1.8A
Output shaft diameter: 6mm with 4.5mm slot
Figure out even more about worm motor on our website.