Right Position Miter Gearbox Standard Features
Dimensions: right position miter equipment drive is 3-21/32″ x 3-15/16″ x 1-1/4″ deep
40% glass filled polypropylene
Weight: 10 ounces
Shafts: Ground high-tensile steel. Any shaft may be used as a drive.
Gears: Hardened straight miter gears
Bearings: Hardened steel ball bearings, long term lubrication
Mounting: Three shaft installation positions provide versatility in application
Versatile: 3 shaft connections are provided for versatility in application
RAB-1 may be operated CW, CCW or BACK driven
RAB-1 is rated in 1/3 HP at 1800 RPM. Maximum speed is 3000 RPM
Benefits and Cost Savings
Longer service life
Greater tooth-to-tooth contact
The most effective power transfer design under rated load conditions
Stainless steel shaft (Please specify series stainless needed)
Longer shafts lengths upon input and output
Right Angle Drives Made out of Advanced Quality Construction
Ever-Power 2-Way Right Position Gearboxes transmit power with silent, reliable spiral bevel gears. These premium bevel gearmotors feature hardened spiral bevel gears and nonmagnetic stainless-steel shafts. Our Two-Way 90° Gearboxes are also small and feature multiple mounting options. The fully enclosed design ensures the integrity of the internal gears.
Additionally, the cast aluminum housing of Ever-Power s premium quality Correct Angle 2-Way Gearboxes are made for maximum strength and heat dissipation. The drives can be found with shafts of 3/8”, 1/2″, 5/8” and 3/4″ diameter in both 1:1 and 2:1 ratios. We are able to quote several exclusive types of shafts as well, including:
Two Way 90 Degree Gearbox Applications
Ever-Power Right Angle Miter Gearboxes are used throughout a large number of industries in a huge selection of applications. Any make use of that demands the reliable transfer of speed or power, you could look for a two-method gearbox bearing the Ever-Power brand. The compact design of Ever-Power Two-Way Right-Angle Gearboxes makes them well suited for applications such as for example:
Food Processing Equipment
Ovens & Dryers
Power Transmission Equipment
Ever-Power Inc, providing the most reliable and reliable transfer of power in the marketplace. Our company is well known for its innovative styles and producing high-quality movement control solutions created for engineered performance and durability. We offer a range of gearbox designs and a broad selection of flexible shaft couplings to provide you with a full solutions for your mechanical and power tranny applications.
Right Angle Gearbox
Correct angle gearboxes are characterized by the actual fact that the drive shaft and the output shaft are arranged at an angle of 90 degrees. With respect to the gearbox type, the axes can intersect in a plane or cross on two parallel planes, which results in an axis offset.
Right angle gearboxes are understood with different types of gear teeth or a combination of different gearing types. The most famous single-stage gearbox types are bevel and worm.
Due to the high solitary stage ratios and the reduced efficiency level, worm gears can achieve a self-locking impact. With worm gears additionally it is possible to have a hollow shaft as the drive shaft.
Bevel gearboxes include various kinds of gearing. Bevel gearboxes with intersecting axes are noticed using bevel gearing with straight, helical or spiral tooth. Hypoid gearboxes possess helical bevel gearing with which the axes cross with an axis offset. The bandwidth of technically practical ratios with which the bevel gear stage could be realized is bigger with hypoid gearboxes than with the classical bevel equipment teeth.
Bevel gearboxes may also be combined with various other gearbox types. A regular app in this respect is the combination with a planetary gearbox, whereby the planetary gearbox could be linked upstream or downstream. This outcomes in a wide range of overall multiplication elements and wide variety of uses in lots of industrial applications.
The efficiency level of bevel gearboxes is normally less than that of coaxial spur gearboxes, particularly in comparison to planetary gearboxes. This is because the bevel gear stage generates a higher degree of axial push and radial power, which needs to be absorbed by suitable bearings. This increases the power reduction, which is particularly significant in the drive stage of the gearbox.
The working noise and the transmittable torques of classic bevel gearboxes are also lower than with single spur gear teeth. Hypoid gearboxes, however, are incredibly noisy and may transmit large amounts of torque, but a great deal of bearing load happens in the bevel gear stage of these gearboxes.
In summarizing, the right angle gearbox is often used when the quantity of installation space in the application form is bound, or an angular arrangement between your drive and the output is necessary by the application. Also, they are used in instances where the input shaft needs to be hollow to be able to lead through lines or use clamping sets.
The benefits of right angle gearboxes:
Use when installation space is limited
Can be coupled with other types of gearbox
Quiet and high amount of torque when working with hypoid gearboxes
Edition with hollow shaft possible
The disadvantages of right angle gearboxes:
Lower effectiveness level than planetary gearbox
Reduced torques in single-stage ratio range
The Ever-Power, the initial right angle gearbox drive, is more popular and is in use worldwide. The Ever-Power provides manual or power transmitting of rotary motion in a COMPACT, standardized right angle unit.
Our standard line of bevel gearboxes can be found from share in both an Inch and Metric Series, single or dual output shafts, 1:one or two 2:1 ratios, and grease lubricated for life and have an operating temperature range of – 65 degrees F to + 200 degrees F ( – 54 degrees C to + 93 degrees C). Making use of carburized case-hardened Coniflex* bevel gears, all Ever-Power units employ completely enclosed & sealed ball bearings.
The cast aluminum housings upon our 90 degree gearboxes are precision machined, on our CNC machining center and coated with a chemical substance film to safeguard the materials, and use flanged ends and side bosses for compact installation in an array of applications.
The shaft materials used for sizes 1, 2 and 3 is #416 stainless. On the 2 2:1 versions, the pinion shaft is definitely carbon metal. For the sizes 4 & 5, the materials is dark oxide carbon metal. Shafts can be provided with particular extensions (with flats, splines, holes, etc.) and /or specific lengths upon ask for.
In addition to our standard models, we will modify our units to meet up your design specifications! Our sales and engineering departments are ready to support you with your specific application requirements.
Over the years we’ve received questions about almost every part of the gearbox selection procedure. One of the questions we’ve had several times is, “What is a right-position gearbox or a right-position drive?” Or, more particularly, “How is certainly a right-position gearbox or drive not the same as a velocity reducer or other styles of gearboxes?”
First, let’s focus on some simple terminology. It is not uncommon for the terms “gearbox”, “drive” and “acceleration reducer” to be utilized interchangeably.
A gearbox is any device that runs on the gear train to transmit torque/rpm and whatever uses a equipment to transmit torque/rpm is a gearbox.
A right-angle drive is a mechanism with a gear train that may transmit torque/rpm 90 degrees, to carefully turn a corner
A equipment reducer is a system with a gear train that may reduce rpm output. A result of decreasing rpm is increasing torque at the same ratio swiftness is reduced.
A gear box can also be a speed increaser
The type of gear used in the gear box defines it as a right angle or an inline drive.
A worm gear drive is a right-angle drive as is a bevel gear
A spur gear drive is inline
A helical gear is inline but can also be a right-angle drive
So, what is a right-angle gearbox?
A right-angle gearbox is a gearbox with a right-angle change in direction of the shaft. It’s rather a 1 to at least one 1 ratio or a multiple of 1 1 such as 2:1 or 15:1. If the ratio is 1:1 it is a right-angle drive. If the ratio is definitely greater than 1:1 it really is a right-angle swiftness reducer.
High torque ball bearing design
Solid one-piece aluminum housing seals gears from outside contaminants for smooth operation
Right- or left-hand rotation to convert power either direction
Easily slides axially along the drive or driven shaft for flexible positioning
Alloy metal helical gears for high performance
Built in 5 sizes with three types of result shaft : hollow, projecting or double-extended. Moreover, an additional output shaft can be installed opposite to the insight shaft.
Three input types are available : with projecting input shaft, with pre-manufactured motor coupling (bell and joint) and pre-engineered Small motor coupling.
Gear unit body in engineering cast iron, EN GJL 200 UNI EN 1561 ribbed internally and externally to ensure rigidity and machined on all areas for easy positioning. The single lubrication chamber guarantees improved temperature dissipation and better lubrication of all the internal components.
The mechanism of these gearboxes consists of two Ever-Power spiral bevel gears with precision lapped profile, 16CrNi4 or 18NiCrM05 made of steel.
The use of high quality bearings on all of the axis ensures long life to the gearbox and allows high radial and axial loads.
Gearbox casing, flanges, bells and covers are externally painted with BLUE RAL 5010.
Right Position Miter Gearbox Standard Features