Laser cutting air compressor

9.Motor maintenance.
According to the motor instruction manual for maintenance.

8. drive belt.
To adjust the degree of tightness every 2000 hours, every 4000 hours to check on the wear and tear, according to deterioration decide whether or not to replace.

7, safety valve.
Every 4000 hours to check on if the action is sensitive.

6.Pressure valve.
Clean every 4000 hours, and check if the opening pressure is normal.

because for oil-air flow compressors, the oil-drinking water separator function: separates the https://www.ever-power.net/?s=laser+cutting+air+compressor&post_type=product essential oil from the moisture in the air flow and therefore accumulates over an extended period of time and may affect the filtration performance without the need to replace or clean the oil-water separator

5, oil and gas separator.
Every 4000 hours have to replaced a fresh piece.

Otherwise the oil can make a impact of the cutting effect

4.oil filter.
Every 2000 hours to replace a new piece.

Every 1000 hours want check oil content however it want to replace the new oil after 4000 hours