Single and double reduction planetary gear drives to be utilized with electric, hydraulic, surroundings motors or mechanical power input from high acceleration, low torque sources to provide decreased speeds at increased torques. The input side has standard SAE pads for motor mounting. Available in the three result configurations proven below. Many units could be furnished with an integral parking brake.
Single reduction drives are limited to 3500 RPM input; dual reduction drives to 5000 RPM. Units with integral parking input speed is limited to 2500 RPM.The same torque is available in either direction of rotation. Torque ratings are intermittent. For continuous operation reduce torque rankings to about 1/3 to 1/2 the values shown. Products provide 95% power transmission efficiency.
Wheel Drive
Input side has regular SAE pads and Plastic Gear Rack splined insight. Output aspect has hub for installation vehicle wheel. Free wheel can be done by using the spring disconnect to disengage the drive shaft. The disengage feature is certainly standard on all wheel drives.
Shaft Output
Input side regular SAE pads with splined insight. Output side options include: Keyed circular, hexed, hollow, tapered or splined shaft.
Spindle Drive
Input side is regular SAE pads with splined insight. Output side has a flanged spindle for coupling to 
the strain.
Swing Drives
Ever-Power model 6 is offered with or without integral parking brakes. The “SW” Power Wheel provides extra-huge tapered roller bearings, a ductile iron hub and temperature treated ring gear to reduce backlash growth caused by wear. The external bearing nut supplies the best in shaft retention and shaft power. Output could be a spindle shaft or different sizes of integral pinion gears.