The EP Series Helical Bevel Reducer provides unmatched performance, durability, and style flexibility. This unit provides torque capacities up to 20,000 Nm (14,750 ft lbs).
The cat4CAD software enables simple interactive product selection of the complete gearbox and gear-motor system. Cat4CAD facilitates you in choosing and configuring these products, gives you the chance to print out comprehensive technical data sheets, and generates complete 2D drawings and 3D models for direct download.
11 sizes
Input power capacities from 0.16 to 120 HP
Gear ratios from 5:1 to 8900:1
Torque capacities to 20,000 Nm
Inverter duty course F insulated motor windings
Class 12 Helical and Spiral Bevel Gears: Provides higher efficiencies and better torques in smaller sized sizes.
Multiple Input Options: Essential gear motors, inch or metric shafts, NEMA, IEC, and servo adapters provide unmatched drive versatility.
Multiple Output Choices: Hollow bores and helical bevel gear reducer shrink disks for shaft mounting, inch and metric output shafts, mounting pilots and flanges offer a wide variety of design solutions.
UNIBLOCK Housing: For maximum rigidity, universal mounting on five sides or with a torque arm.
Worldwide Electric motor: Multiple leads and windings for worldwide multi volt/Hz requirements in addition modular design to simply accept brakes, encoders or forced cooling.
High efficiency electric motor design available
Innovative self-locking, self-aligning taper shaft engine connection
Gearbox supplied factory filled up with synthetic oil
Corrosion and shock resistant cast iron housing
High efficiency helical-bevel gears. 98% per stage
Normally closed breather with multiple locations (Optional OtN2000)
Double lip seals on heat treated, plunge ground shafts
Shaft mounting options include tapered bushings designs
This is a thorough offering of energy-efficient, right angle helical bevel enclosed gearing. It is available as gearmotors and a number of reducers with torque capacities up to 119,000 inch pounds. Housing designs include footed, encounter and flanged configurations. Gearmotors can be found in three stage high efficiency styles through 50 HP and single phase to 5 HP. We offer a variety of input and result shaft choices. Additionally, you will see fixed and variable velocity motors and selection of ratios available in this product offering.
Features
Accommodates insight power from ΒΌ Hp to 75Hp
Torque ratings up to 119,489 in-lbs
Decrease ratios up to 7,500:1
Helical – bevel – helical gear train offers affordable high and low speed solutions
Up to 94% efficient
Four input options available for all units
Two output flange choices – B5 and B14
Multiple output shaft interfaces
Essential dimensions interchangeable with major competitors
Modifications / Accessories
Integral Gearmotor
Clamp Collar C-Face Input
Solid Shaft Input
3-Piece Coupled C-Face Input
CEMA Screw Conveyor Adapter
EZ Kleen Washdown Package
XT Output Seals
Backstop
Heavy Duty Output Bearings
Inch or Metric Dimensions
Common Applications
Troughing Belt Conveyors
Slider Bed Conveyors
Mixer Drives
Screw Conveyors
Bucket Elevators
General Industrial Machinery
Common Industries
Aggregate and Cement
Air Handling
Chemical, Oil, and Gas
Food, Beverage, and Pharmaceutical
Paper and Forest
Unit and Baggage Handling
Water and Wastewater
As per the growing and varying demands of customers, we offer an array of Helical Bevel Gear Reducers. The technological articles of our products allows for an extraordinary functionality/lifespan ratio. The highly versatile Helical Bevel Gear Reducers we provide are successfully used in a vast number of commercial and civil applications. These are B-Series units that offer excellent affordability and result torque/weight ratio, especially considering that they need not a lot of servicing. Besides these, our products are available in cast iron (sizes 063 to 163) or aluminum (sizes A42 to A73) casing.
Features:
Sizes: 060-080-100-125-140-150-160
Available versions: B-fitted for engine coupling, IB with input shaft, CB with small motor, PB-fitted for engine coupling with flexible joint
Casing with ft FC, flange SC and universal UC
Switch on to 90 kW
Gears hardened and tempered with shaved or floor profile
Gearing with 3 decrease stages
Gleason spiral bevel gear pairs with run-in profile, mounted as second reduction stage for a higher resistance
Reduction ratios between 5, 71 and 187, 24
Torque max 13.000 Nm and admissible radial loads max 80.000 N
High-strength casings optimized with FEM analysis and input and output flanges of grey cast-iron G200 to make sure top level performances and high reliability
Load capacity calculated and verified according to ISO 6336 and AGMA 2001
Painted with RAL 5010 blue epoxy-polyester powder
Accessories: torque arm, output flange, output shaft, shrink disk, backstop device, protection cover package, viton essential oil seals, reinforced output, assemble/disassemble kit
Series EP right angle helical bevel equipment motors offer ratios from 8:1 to 160:1 in three levels or up to 10000:1 in five stages. Motors are available up to 90kW and output torque capability up to 12,300 Nm.
The series EP helical bevel gear motor was created with integral cast feet for base or end mounting and will be offered with single or double extended output shafts.
Models are also available 
as shaft mounted or with result flanges and are available for mounting horizontally or vertically. The systems can also be offered with a bolt on torque reaction bracket and all variants can be found possibly motorised or with an insight shaft assembly.
Adding to the brand new selection of Ever-Power helical equipment motors this product takes advantage of our many years of accumulated design expertise together with the use of high quality materials and parts. The outcome is a number of acceleration reducing geared motors offering high load transporting capacities, increased efficiency, silent running and reliability.
Top features of Helical Bevel Gear Motor
Standard motor connection
Capability to fit double essential oil seals, on insight and output shaft because required.
All products are dimensionally interchangeable with various other major manufacturers.
Units are manufactured and assembled from a family group of modular kits for distributor friendliness minimizing inventory and maximizing availability.
Motorized units could be installed with a backstop module and reducer Models can be installed with a backstop and fan.
Applications:
-Conveyors, Agitators, Elevators, Cranes, Crushers
-Helical Bevel gear motors are used in industries such as chemicals, pharma, packaging, food processing, plastic-type and automation etc.
Key Features:
Sizes: A40-A50-A70
Obtainable versions: EP – fitted for electric motor coupling, IEP – with input shaft, CEP – with compact motor
Cases with ft, flange or universal
Power up to 4,8 Kw
Gears with shaved or floor profile
Gearing with 2 and 3 reduction stages
Hypoid bevel gears for size A40 and A50, gleason bevel gear pairs for size A70, all with run-in profile
Reduction ratios between 7,62 and 442,76
Torque max 450 Nm and admissible radial loads max 5.500 N on hollow shaft and 10.000 N on solid shaft
Cases in die-cast aluminium alloy
Exceptional mechanical strength while being and particularly lightweight
Load capacity calculated to ISO6336 and verified according to AGMA 2001-B88
Painted with RAL 5010 blue epoxy-polyester powder in in accordance to DIN 1843
Accessories: torque arm, result flange, output shaft.
Generallntroduction of HK series:
Gear Reducer
The EP series gear units, are novel transmission gadget and composed of Y series electric motor, helical gear,Arc gear and worm gear. The gears are made of high wear-resisting alloy materials, specially and finely processed.
Advantages:
1: Helical-bevel gear two-stage reducer
2: Compact framework, high efficiency
3: Quenched 20CrMnTi for gears
4: CE, ISO9001.
5: Small design, small volume, good appearance ,and strong capacity of being overloaded.
6: Precise division and wide range for transmission ratio.
7: The effectiveness is up to as high as 96% with low energy intake, strong adaptability and is capable of working continually in corrosive or damp environment.
8: All- purpose use, convenient and low-cost maintenance.
9: New seal gadget, strong adaptability.
10: Varied range of motor combinations, mouting positions and struture projects.