Flexible plastic equipment racks in 0.8 Mod (32DP) pitch. These racks can offer an easy to install rotational drive as high as approx 270 degrees for example on camera focus bands. They also offer an economical answer where a huge gear is necessary or a longer stretch (up to 2 metres) of linear movement is desired. These racks are compatible with our 0.8 Mod and 32 DP pitch Spur Gears.
EVER-POWER stock racks are created for high precision linear motion applications. We offer a large selection of racks which range from module 0.5 to 10 and lengths from 100 to 2000 mm. 
Hardened Floor Racks (MRGF – MRGFD) : Has the highest power and precision in the EVER-POWER standard rack series. Bolt holes can be remachined as carburizing can be applied only within the tooth area. J Series items are also available.
Hardened Floor Racks (KRGF-H – KRGFD-H) : Warmth treated surface gears with high precision and power has excellent cost-overall performance ratio. J Series items are also available.
Hardened Racks (KRF-H/KRFD-H) : This is a strong rack manufactured from Chromoly steel, treated by carburizing. Has high-strength, high wear level of resistance, and enables downsizing of SR racks. J Series items are also available.
Hardened Racks (SRF-H/SRFD-H) : Stable Hardened racks with high strength, extended life span are reasonably priced. J Series items are also available.
Thermal Refined Ground Racks (KRG – KRGF – KRGD) : High strength and abrasion-resistant for precision linear motion.
Steel Racks w/ Machined Ends (SRAF – SRAFD – SRAFK) : This gear rack gets the same tooth elevation and face width sizes, smaller sized and reasonably priced in comparison to SRF Racks
Steel Racks (SR) : Low priced, large choices of modules and number of tooth. J Series items are also available.
Steel Racks w/ Machined Ends (SRF) : Low priced, large selections of modules and quantity of tooth. J Series items are also available.
Racks with Bolt Holes (SRFD – SRFK) : Low priced, large choices of modules and amount of teeth. J Series products are also available.
Stainless Steel Racks (SUR•SURF•SURFD) : Ideal for food machinery because of SUS304 materials\’s rust-resistant quality.
Plastic-type material Racks (DRF/DRFD/DRFK) : Plastic racks with small dimensional change, absorb lesser water than MC Nylon racks. J Series products are also available.
Plastic-type Racks (PR•PRF) : Made form MC nylon, can be used without lubrication.
Brass Racks (BSR) : Small pitch racks manufactured from free-reducing brass, excellent workability and high rust resistance.
Steel Circular Racks (SRO – SROS) : Convenient in applications where in fact the rack has the reciprocal motion. S Type is easy to install.
Stainless Steel Round Racks (SURO) : Same dimensions as SRO racks, except in stainless. Make use of where rust-resistance is required.
Surface Helical Racks (KRHG – KRHGF – KRHGFD) : Excellent items with high precision and strength, and low sound and abrasion characteristics.
Metal Helical Racks (SRH – SRHF – SRHFD) : Effective in reducing noise and vibration because of larger contact ratio of helical gears.
Molded Flexible Racks (DR) : Found in applications due to its flexibility, where metal racks do no possess this attribute. Pinions and accessories are also available.
Molded Versatile Rack Clamps (SRS) : Used to secure Molded Versatile Racks.
Molded Flexible Rack Pinions (SSDR) : Spur pinions utilized for molded versatile racks.
Flexible Rack Information Rails (ARL) : Guide Rails for Molder Versatile Racks.
We offer as standard an array of Racks in Metric and Imperial sizes. Spur Racks are available in Steel (En8) and up to 2 metres in length. Stainless Steel and Delrin (Plastic-type) Racks are created with Spur and Helical tooth forms, square and round sections up to 400mm in length. Alternative materials are available on demand. Moulded Hostaform Racks can be found to offer an economical alternative where less torque is required.
Variable stiffness can enhance the capability of human-robot interacting. Based on the system of a flexible rack and equipment, a rotational joint actuator called vsaFGR is certainly proposed to modify the joint stiffness. The versatile gear rack could be regarded as a mixture of a nonlinear elastic element and a linear adjusting system, providing advantages of compactness. The joint stiffness is in the number of 217-3527 N.m/rad, in fact it is inversely proportional to the 4th-purchase of the gear displacement, and almost independent from the joint angular deflection, providing benefits of quick stiffness regulation in a short displacement of 20 mm. The gear displacement with regards to the flexible gear rack is certainly perpendicular to the joint loading drive, so the power required for stiffness regulating is as low as 14.4 W, providing advantages of energy conservation. The high compactness, great stiffness range and low power price of vsaFGR are proved by simulations and experiments.
Flexible plastic equipment racks in 0.8 Mod (32DP) pitch. These racks can provide an easy to install rotational drive as high as approx 270 degrees for example on camera focus bands. They also provide an economical option where a sizable gear is required or an extended stretch (up to 2 metres) of linear movement is preferred. These racks are compatible with our 0.8 Mod and 32 DP pitch Spur Gears.
EVER-POWER stock racks are created for high precision linear motion applications. We offer a large collection of racks ranging from module 0.5 to 10 and lengths from 100 to 2000 mm.
Hardened Surface Racks (MRGF – MRGFD) : Has the highest strength and precision in the EVER-POWER standard rack series. Bolt holes can be remachined as carburizing can be applied only within the tooth region. J Series products are also available.
Hardened Floor Racks (KRGF-H – KRGFD-H) : Heat treated floor gears with high precision and power has excellent cost-functionality ratio. J Series items are also available.
Hardened Racks (KRF-H/KRFD-H) : This is a strong rack made of Chromoly steel, treated by carburizing. Has high-strength, high wear level of resistance, and allows downsizing of SR racks. J Series items are also available.
Hardened Racks (SRF-H/SRFD-H) : Steady Hardened racks with high strength, extended life span are reasonably priced. J Series products are also available.
Thermal Refined Ground Racks (KRG – KRGF – KRGD) : High strength and abrasion-resistant for precision linear motion.
Steel Racks w/ Machined Ends (SRAF – SRAFD – SRAFK) : This gear rack has the same tooth elevation and face width sizes, smaller sized and reasonably priced in comparison to SRF Racks
Steel Racks (SR) : Low cost, large selections of modules and quantity of teeth. J Series products are also available.
Steel Racks w/ Machined Ends (SRF) : Low priced, large selections of modules and number of teeth. J Series items are also available.
Racks with Bolt Holes (SRFD – SRFK) : Low cost, large choices of modules and amount of teeth. J Series items are also available.
Stainless Steel Racks (SUR•SURF•SURFD) : Ideal for food machinery due to SUS304 materials\’s rust-resistant quality.
Plastic material Racks (DRF/DRFD/DRFK) : Plastic racks with little dimensional change, absorb lesser water than MC Nylon racks. J Series products are also available.
Plastic material Racks (PR•PRF) : Produced form MC nylon, can be used without lubrication.
Brass Racks (BSR) : Little pitch racks manufactured from free-reducing brass, excellent workability and high rust resistance.
Steel Round Racks (SRO – SROS) : Convenient in applications where the rack has the reciprocal movement. S Type is simple to install.
Stainless Steel Circular Racks (SURO) : Same dimensions as SRO racks, except in stainless steel. Use where rust-resistance is necessary.
Surface Helical Racks (KRHG – KRHGF – KRHGFD) : Excellent products with high precision and power, and low noise and abrasion characteristics.
Metal Helical Racks (SRH – SRHF – SRHFD) : Effective in reducing noise and vibration because of larger contact ratio of helical gears.
Molded Versatile Racks (DR) : Found in applications due to its flexibility, where metallic racks do no have this attribute. Pinions and accessories are also available.
Molded Flexible Rack Clamps (SRS) : Utilized to secure Molded Flexible Racks.
Molded Flexible Rack Pinions (SSDR) : Spur pinions used for molded versatile racks.
Flexible Rack Guidebook Rails (ARL) : Guidebook Rails for Molder Versatile Racks.
We offer as standard an array of Racks in Metric and Imperial sizes. Spur Racks can be found in Steel (En8) and up to 2 metres in length. STAINLESS and Delrin (Plastic material) Racks are produced with Spur and Helical tooth forms, square and circular sections up to 400mm long. Alternative materials are available on ask for. Moulded Hostaform Racks are available to offer an economical alternative where much less torque is required.
Variable stiffness can improve the capability of human-robot interacting. Predicated on the mechanism of a versatile rack and gear, a rotational joint actuator named vsaFGR is certainly proposed to regulate the joint stiffness. The versatile gear rack can be regarded as a mixture of a nonlinear elastic element and a linear adjusting system, providing benefits of compactness. The joint stiffness is certainly in the number of 217-3527 N.m/rad, and it is inversely proportional to the 4th-order of the apparatus displacement, and nearly independent from the joint angular deflection, providing advantages of quick stiffness regulation in a short displacement of 20 mm. The gear displacement with respect to the flexible equipment rack is certainly perpendicular to the joint loading power, so the power necessary for stiffness regulating is as low as 14.4 W, providing benefits of energy saving. The high compactness, great stiffness range and low power price of vsaFGR are proved by simulations and experiments.