Fan Electric motor, 1/8 hp 120V 2.2 Amp 3-Speed
General Description: New fan motor, taken off unused 18” or 24” China Air flow Compressor diameter TPI fans. Designed to operate an 18” or 24” enthusiast blade (blade NOT included).
This motor includes a (detached) cord with grounded plug, motor capacitor and a 3-speed control switch. All the wiring between your electric motor, capacitor and quickness control switch is still hooked up however the cord itself is normally detached as observed in the photos. (Find “Control Notice” below for alter type.)
T (See “Application Notice” below for utilize in various other applications.)
Dimensions: The engine body is 5” diameter and 3 ½” long (not including the shaft). The engine shaft is½” (0.500″) diameter x 2 ½” lengthy with a collection screw easy. There are (4) threaded mounting lugs on leading of the motor, ½” lengthy x .16 dia. with washers and nuts. The studs appear to have got 4mm threads and also to become on a 117mm (4.6”)diameter circle (3 ¼” measured from one stud to another).
Rate: The approximate electric motor speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Direction of rotation (facing the shaft end of the electrical motor) is Clockwise.
Control Take note: Motors will come with EITHER a 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we’ve demonstrated BOTH versions in the images). These two types of switches both control the engine just as (but you have a rotating knob and you have a pull-chain). If you order several engine at a time, we will do our best to supply your purchase with each one sort of control or the excess.
Application Note: Do NOT use this electric electric motor in a nonfan app. This is a completely enclosed fan electric motor and made to have constant ventilation over the electric motor casing for cooling. The casing isn’t vented and the electric motor will electric fan motor china overheat and get into automated thermal 
overload if run in a nonfan system where there isn’t solid ventilation past the motor. (Caution Note: the electric motor will restart immediately when it cools back off.) Using this electrical motor for applications aside from 18 & 24″ TPI fans may possibly also overload the electric motor and cause it to proceed into automatic thermal overload. (Your lover blade from another producer may possess a steeper blade angle.)
Origin: This electric engine is produced in China.