We – EPG Group the largest agricultural gearbox and pto manufacturing unit in China with 5 diverse branches. For far more details: Cell/whatsapp/telegram/Kakao us at: 0086-13083988828
This heavy-responsibility BW-1000XL brush chipper with its all-stell engine enclosure is developed to maintain up for the prolonged haul. In a position to Chip via substance up to 12” (30.5cm), the need to have to rim substance is reduced , creating the BW-1000XL an excellent device for line-clearing contractors, rental yards and municipalities.
Increased with the modern day working day operator in brain, the BW-1000XL is accessible with a Tier 3 Cummins QSF two.8L 74HP (55kW), when transpoting the machine, count on easy towing thanks to the rubber -torsion suspension.
It is straightforward to see w EPT the BW-1000XL is the brush chipper that operators change to.
1: Operator protection. Unexpected emergency cease buttom is designed on side.
2: A clutchless PTO technique permits the cutter to be engaged without having using a traditional slip clutch or idler pulley and with out s EPT the motor. The program is easy to keep – once beneath the protect, belt alterations are effortlessly
achieved without the use of equipment.
3: The Feed system aids improve operator productiveness even though lowering pressure on essential motor components. The feed-sensing control program displays motor rpm and automatically stops and reverses the feed roller when feeding more substantial, hardwood material.
4: A large rectangular twelve” x 17″ (thirty.five cm x forty three.2 cm) feed opening aids increase efficiency by lowering the need to have to trim content ahead of feeding it into the chipper.
five: The 2-12 months/2000-hour prolonged constrained guarantee on drum housing, cutter drum, shaft and ring-fetter hubs offers you peace of mind.
Technical knowledge for BW-1000XL:
| Common Dimensions and Weights | |
| Duration – Feed Table Up, Tongue In | 4500 mm |
| Length – Table Down, Tongue Extended | 5400 mm |
| Width | 1750 mm |
| Height | 2560 mm |
| Bodyweight – Engine | 2750 kg |
| Seem Power | 119 (db) |
| Motor | |
| Make and Product | Cummins QSF 2.8L Tier 3 |
| Variety of Cylinders | 4 |
| Gross Horsepower (Highest) | 74HP (fifty five Kw) /2400rpm |
| Torque (Max) | 371 Nm |
| Gas Tank Potential | 65 L |
| Max Fuel Consumption | 233g /Kw.h |
| Fuel Sort | Diesel |
| Air Cleaner | 2-phase dry with safety element |
| Oil Filter | Spin-on |
| Advised Oil | 15W40 |
| Oil Quantity with Filter | 8.4 L |
| Cool EPT Capability (Motor and Radiator) | 13 L |
| Cooling Medium | Liquid |
| Enthusiast | 419mm |
| Clutch Variety | Clutchless PTO |
| Clutch Travel Engagement | Belt tensioner |
| Feed Program | |
| Feed Roller Orientation | Horizontal |
| Amount of Feed Rollers | 1 |
| Feed Roller Clamp Load | 158.eight kg |
| Feed Roller Minimum Distance to Drum | 25mm |
| Feed Roller Dimension | 508mm x 432mm |
| Quantity of Knives | 2 |
| Weight of Feed Roller | 181.4 kg |
| Quantity of Feed Roller Motors | one |
| Motor Displacement | 28.three |
| Motor Maker | White |
| Feed Pace | 105 ft/min |
| Infeed Table Width | 1321mm |
| Infeed Hopper Peak | 1330mm H x 750mm W |
| Infeed Throat Capability | 630mm H x 432mm W |
| Pinch Position – Distance to End of Feed Desk | 1689mm |
| Distance from Feed Desk to Ground | 820mm |
| Basic safety Method | |
| Feeding quit system | Unexpected emergency stop buttom on Facet of Infeed Hopper |
| Reset Technique | Maintain-to-operate Emergency end buttom button |
| A few Situation Feed Management Bar | Regular |
| Positions | three: forward, Stop and reverse |
| Drum/Disc Cutting Program | |
| Content Ability | 305mm |
| Diameter | 50mm |
| Speed | 2240 rpm |
| Protection Lock – Quantity of Positions | 2 |
| Number of Knives | two pieces |
| Number of Bedknife | 4 |
| Cutter Travel Components | |
| Quantity of Bearings | 2 |
| Bore | 61mm |
| Type | Spherical rollers |
| Producer | Linkbelt |
| Dynamic Potential | 14242.eight kg |
| Static Capability | 24267.two kg |
| Belt Idler/Tensioner | Of course |
| Belt Sort | 5V |
| Discharge System | |
| Chute Peak | 2565mm |
| Chute Rotation Angle | 270 deg |
| Rotation Type | Chain-drivve handbook crank with pin lock |
| Rotational Lock | Of course |
| Hydraulic Technique | |
| Tank capability | 26.5 L |
| Suggested Oil Type | #68 Antiwear hydraulic oil |
| System Sort | Open middle |
| Filtration Method | 10 micron return one hundred micron suction |
| Pump Flow at Optimum RPM | eleven.four L/min |
| Method relief strain | seventeen.24 Mpa |
| Movement Handle | Sure-Guide |
| Directional Handle | Of course-Manual |
| Oil Cooler | No |
| Electrical System | |
| Program Voltage | twelve volt |
| Battery | ninety/660 (Ah/A) Germany Walter Brand name |
| Common Gauges | Gasoline, hour |
| Switches | Droop, rocker |
| Controller | BODE |
| Show | Tach, gasoline, voltage, drinking water temp, oil stress,oil temp, loading, engine erro info |
| Shutdown Program | Car Large temp, low stress safety |
| Chassis | |
| Tongue Extension | Extendable 610mm @ 305mm increments |
| Hitch Sort | Pintle |
| Fender Description | Bolt-on metal |
| Axle/Suspension | Torsion |
| Variety – Option 1 | Rubber torsional |
| Brake Kind | Regular Electric powered or optional hydraulic |
| Trailer Light-weight Type | LED |
| Standard Dimensions and Weights | |
| Length – Feed Desk Up, Tongue In | 4500 mm |
| Size – Desk Down, Tongue Prolonged | 5400 mm |
| Width | 1750 mm |
| Top | 2560 mm |
| Weight – Motor | 2750 kg |
| Audio Energy | 119 (db) |
| Motor | |
| Make and Design | Cummins QSF 2.8L Tier 3 |
| Variety of Cylinders | four |
| Gross Horsepower (Highest) | 74HP (55 Kw) /2400rpm |
| Torque (Max) | 371 Nm |
| Fuel Tank Ability | 65 L |
| Max Gasoline Intake | 233g /Kw.h |
| Fuel Kind | Diesel |
| Air Cleaner | two-phase dry with basic safety aspect |
| Oil Filter | Spin-on |
| Recommended Oil | 15W40 |
| Oil Volume with Filter | 8.four L |
| Great EPT Ability (Engine and Radiator) | thirteen L |
| Cooling Medium | Liquid |
| Admirer | 419mm |
| Clutch Kind | Clutchless PTO |
| Clutch Generate Engagement | Belt tensioner |
| Feed Method | |
| Feed Roller Orientation | Horizontal |
| Amount of Feed Rollers | 1 |
| Feed Roller Clamp Load | 158.eight kg |
| Feed Roller Minimal Distance to Drum | 25mm |
| Feed Roller Dimension | 508mm x 432mm |
| Variety of Knives | two |
| Fat of Feed Roller | 181.4 kg |
| Quantity of Feed Roller Motors | 1 |
| Motor Displacement | 28.3 |
| Motor Maker | White |
| Feed Speed | 105 ft/min |
| Infeed Desk Width | 1321mm |
| Infeed Hopper Height | 1330mm H x 750mm W |
| Infeed Throat Capability | 630mm H x 432mm W |
| Pinch Stage – Distance to End of Feed Table | 1689mm |
| Length from Feed Table to Ground | 820mm |
| Security Technique | |
| Feeding end method | Emergency cease buttom on Facet of Infeed Hopper |
| Reset Approach | Keep-to-operate Unexpected emergency quit buttom button |
| 3 Place Feed Manage Bar | Regular |
| Positions | three: forward, Cease and reverse |
| Drum/Disc Cutting Technique | |
| Materials Capability | 305mm |
| Diameter | 50mm |
| Speed | 2240 rpm |
| Safety Lock – Quantity of Positions | 2 |
| Number of Knives | 2 pieces |
| Number of Bedknife | four |
| Cutter Drive Factors | |
| Number of Bearings | two |
| Bore | 61mm |
| Variety | Spherical rollers |
| Manufacturer | Linkbelt |
| Dynamic Ability | 14242.eight kg |
| Static Potential | 24267.two kg |
| Belt Idler/Tensioner | Indeed |
| Belt Variety | 5V |
| Discharge Program | |
| Chute Height | 2565mm |
| Chute Rotation Angle | 270 deg |
| Rotation Variety | Chain-drivve handbook crank with pin lock |
| Rotational Lock | Indeed |
| Hydraulic Method | |
| Tank capability | 26.five L |
| Advised Oil Kind | #68 Antiwear hydraulic oil |
| Method Kind | Open up center |
| Filtration Method | 10 micron return one hundred micron suction |
| Pump Stream at Optimum RPM | eleven.four L/min |
| Technique reduction force | seventeen.24 Mpa |
| Flow Control | Yes-Manual |
| Directional Handle | Of course-Handbook |
| Oil Cooler | No |
| Electrical Method | |
| System Voltage | 12 volt |
| Battery | ninety/660 (Ah/A) Germany Walter Model |
| Regular Gauges | Gas, hour |
| Switches | Droop, rocker |
| Controller | BODE |
| Display | Tach, fuel, voltage, h2o temp, oil force,oil temp, loading, motor erro information |
| Shutdown Method | Car Higher temp, minimal stress defense |
| Chassis | |
| Tongue Extension | Extendable 610mm @ 305mm increments |
| Hitch Kind | Pintle |
| Fender Description | Bolt-on steel |
| Axle/Suspension | Torsion |
| Variety – Selection A single | Rubber torsional |
| Brake Sort | Standard Electrical or optional hydraulic |
| Trailer Mild Sort | LED |
